Product illustrations are exemplary and may differ from the chosen product.
Position switch 236 thermoplastic enclosure with roller plunger, double insulated, Actuator heads can be repositioned by 4 x 90°, Good resistance to oil and petroleum spirit, Snap action with constant contact pressure up to switching point, 1 Cable entry M 20 x 1.5
| Technical Specifications | |
| Material | - Housing: Plastic, glass-fibre reinforced thermoplastic, self-extinguishing - Contacts: Silver |
| Ingress Protection (IP) rating | IP67 |
| Operating Temperature | - min: −30 °C - max: +80 °C |
| Measurements | |
| Dimensions : H x W x D (mm) | H 84 x W 30 x L 30mm |
| Weight (gram) | 60g |
| Mechanical Data | |
| Design of electrical connection | Screw connection |
| Cable section | - min: 1.5 mm² - max: 2.5 mm² |
| Design of actuating element | Roller plunger |
| Switching frequency | max. 5000/h |
| Mechanical life | 20.000.000 operations |
| Positive break force | 19 N |
| Switchover time | < 5.5 ms |
| Actuating speed with actuating angle 30° to switch axis | - Min. Actuating speed : 20 mm/min - Max. Actuating speed : 1 m/s |
| Bounce duration | < 3 ms |
| Electrical Data | |
| Design of control element | Normally open contact (NO), Opener (NC) |
| Switching Principle | Snap switch element |
| Number of auxiliary contacts | 1 |
| Number of safety contacts | 1 |
| Rated impulse withstand voltage Uimp | 6 kV |
| Rated insulation voltage Ui | 500 V |
| Thermal test current Ithe | 10 A |
| Max. fuse rating | 6 A gG D-fuse |
| Required rated short-circuit current | 1000 A |
• Thermoplastic enclosure
• Good resistance to oil and petroleum spirit
• Wide range of alternative actuators
• 30 mm x 58,5 mm x 30 mm
• Snap action with constant contact pressure up to switching point
• 1 Cable entry M 20 x 1.5
• Double-insulated
• Mounting details to EN 50047
• Actuator heads can be repositioned by 4 x 90°
